 |
 |
 |
 |
Home SURFACE AERATORS Hydromixers & Air Injection Aerators Display aerators Horizontal circulators Aeration The importance of aeration and how to create a system that's right for your pond. Bottom Mounted Aerators for Deep Ponds Bottom Mounted Aerators for Ponds less than 12 Feet Deep
Fountains A complete family of large and small water castles to add drama to your pond Windmills Use the wind to power an aeration system Generate Electricity Beneficial Bacteria Bioaugmentation products to restore pond water quality and remove muck and algae. Liquid and dry bacteria Solar Aeration & Wind Power Controlling Vegetation with AquaScreen™ Valves & Gates Water level control and management products Submit a Pond Needs Form Site map and Newsletter  
|  | | ||
| |
|
| ||||||||||||||||||||||||||
Kasco
high oxygen transfer aerators offer the best value available for increasing and
maintaining oxygen levels in a pond to improve water quality and overall fish
health.
One
person can easily move these aerators from pond to pond making them ideal for
emergencies and a standard for continuous aeration.
Kasco Aerators can be used to increase oxygen levels during feeding, as well as
to increase fish densities. Typical fish farms farm use Kasco aerators to maintain
densities of up to .4 pounds of fish per gallon of water. The aerators are also
used to vent carbon dioxide.
F2400/AF
120V 
Model
C-25: The C-25 is an option for the F2400/AF, F3400/AF and 4400AF High Oxygen
Transfer Aerators. The model C-25 Unit Control is a customer installable
rainproof control box used for Kasco's 120V pond aerator products. The C-25 features
a 24-hour timer and GFCI protection. No hard wiring is necessary to make your
power connection. 
Model
C-75: The C-75 is an option
for the F3400H/AF, 4400H/AFand 8400/AF High Oxygen Transfer Aerators.The
model C-75 120V/240V Unit Control features GFCB protection, a 24-hour timer, a
lightning arrestor, and a light-ready low-voltage transformer in a rain-proof
enclosure. This control box requires hard-wire connection to four leads (two hots,
a neutral, and a ground) and must be installed by a qualified electrician.
